- Clamp On Power Tester w/ Bluetooth
- Damage-resistant jaws
- Rotary switch that can be turned with a single hand
- Dustproof and waterproof: IP54
- White backlight Wide viewing angle display
- Measure power ranging from 5 W at a low current of 60 mA to 360 kW
- In addition to current, voltage, and power, measure simple integral power consumption and phase sequence
Factor
| Hioki clamp meters are best in class handheld current and voltage meters for safely and accurately measuring power lines. The CM3286 clamp on power meter can measure voltage, current, power, power factor, phase angle, reactive power or frequency, as well as detect phase sequence on live lines at any desired point of a single-phase circuit or three-phase circuit. |
Model No. (Order Code)
Note: *The indicated value for three-phase power is based on the assumption of a balanced condition and sine wave without distortion at 50/60 Hz. Accurate measurement is not possible on an unbalanced or inverter controlled three-phase line. Also, if the phase (zero cross) cannot be detected due to significant waveform distortion, it cannot be measured nor displayed. *The power factor / phase angle are values obtained from the zero cross of the current and voltage. If the phase (zero cross) cannot be detected due to significant waveform distortion, it cannot be measured nor displayed.  |
|---|
|
CAT IV 600V, CAT III 1000V Key Features • Display four parameters simultaneously |
|---|
| A comment from the Good Design Award 2017
“The CM3286/CM3286-01 offers an extensive range of measurement functionality in a compact footprint, most notably the ability to check for electricity theft in emerging nations. The award recognizes how the product has carried on Hioki’s proven clamp meter design while offering the functionality and ease of use that customers have come to expect from such instruments, along with a highly socially significant design that demonstrates an understanding of how workers check for electricity theft in emerging nations and applies the results of observing how such products are used in the field in order to create a more useful instrument. One hopes that the product will serve to eliminate the problem of electricity theft.” Data can be downloaded to tablets and smartphones using Hioki’s dedicated apps available from the Google Play or App Store. (CM3286-01 only) *Android, Google Play and the Google Play logo are trademarks of Google Inc. |
 |
Broad measurement range
Delivering a broad range of measurements at sites from manufacturing plants to households Measure power in single-phase to balanced three-phase circuits (with estimated values) |
|---|---|
 |
Easy-to-see display
Related parameters and connection locations shown on the display at once (Main parameter×1, Sub-parameter×3) |
| Quick and easy data recording (CM3286-01 only)
When you freeze the measured value, it is automatically transferred to a smartphone or tablet, eliminating the need to jot down readings by hand. *Available for Android and iOS devices |
|
 |
Simple wiring guide
The CM3286 provides a simple on-screen guide indicating how to connect it to a 3-phase circuit. |
 |
Built-in AUTO HOLD function
The clamp meters beep when the measured value stabilizes and then automatically hold the display value. |
 |
Double warnings with sound and light
When the clamp power meter detects excessively over current or voltage input during a continuity check, it alerts you with a red backlight and beeping tone in order to help prevent accidents. |
 |
Quickly check for unbalance
The CM3286 can measure unbalanced power in a 3-phase/ 3-wire circuit by measuring the single-phase power twice and then automatically adding the results. |
 |
Easily check power supply fluctuations
Since it can display maximum (MAX), minimum (MIN), and average (AVG) values, the CM3286 is useful when you need to ascertain the magnitude of fluctuations. |
 |
Support for large-diameter, high-current measurement
The CM3286 can be used with the optional Clamp On Adapter 9290-10 to measure busbars of up to 55 mm in diameter or 80 × 20 mm. |
 |
Accurately detect electricity theft
The CM3286 is ideal for verifying electricity theft since it can measure both AC power and current. ● Meter tampering: Detect by comparing electric meter readings and measurements ● Direct theft: Detect by measuring current
|
 |
Electricity theft detection-and-report function (CM3286-01 only)
The instrument’s electricity theft detection-and-report function can be used to quickly and easily make measurements and generate reports (CM3286-01 only). Simply follow the measurement procedure to take measurements and photographs at four locations and the instrument will automatically generate a report, complete with photos. Since the report is generated automatically in the field based on captured measurement data, it’s impossible for others to alter the data.
|
