SEW 8025LP – Digital LOOP/PSC Tester

Description

● Battery is not used.
● 3 ½ digit LCD (2000-count).
● Backlight function.
● 15mA loop measurement which will   not trip ELCBs.
● Convenient and easier for users to
measure the loop impedance directly without bypassing the wires.
● Wiring check function.
● Over temperature protection.
● Over voltage protection.
● Built-in voltmeter.
● Built-in earth tester.
● Built-in loop/psc tester.
● Safety standard :
EN 61010-1 CAT III 300V
EN 61326-1

Voltage Display
Measuring range Accuracy Remark
150~260 V (2%rdg + 4dgt) at 0 Ω external loop

General
:Temperature 0 ~ 40 °C
:System voltage 230V
+13%
-15%
:System frequency 50Hz
:None Battery system voltage 150V ~ 260V
:Over Temperature Protection
When overheating,the ” ” symbol
will show on the LCD, and the 8025LP
stop measuring.
:Wiring check
P-E LEDs illuminate when the
wiring polarity of circuit under
P-N test is correct
N-E
LED is light when P and N are
reversed or the Earth is not
connected.
:15mA Loop measurement
Loop impedance 2000Ω range
measurement is carried out with low
test current (15mA).
The current will not cause tripping
out for ELCBs.